چکیده:
گره های متقارن و نامتقارن به عنوان دو گره اصیل، خواص فیزیکی و مکانیکی متفاوتی دارند که کاربرد آن ها در قالی تاثیر بسزایی دارد. گره جفتی و بی گره بافی خواص متفاوتی نسبت به گره های اصیل و مجاز به قالی می دهند و در صورتی که برای ایجاد خاصیت ویژه ای به کار گرفته شوند، ممکن است در موارد نادری به افزایش کیفیت فرش منجر شوند، هر چند که در وضعیت فعلی می تواند لطماتی را به فرش دستباف ایران وارد کند. به جهت اهمیت این خواص، کتب و مقالات مختلفی در موردشان اظهار نظر کرده اند.
نمونه های قالی با استفاده از یک نوع مواد اولیه و با کاربرد هر چهار نوع گره فوق الذکر توسط یک بافنده بافته شده و تاثیر این گره ها بر طول فرش، ضخامت فرش و ارتفاع پرز اندازه گیری شد. نمونه های بافته شده با دو روش تولید شدند؛ روش اول کنترل ضربات دفتین است که در آن پس از هر رج گره گذاری، دو بار با ضربات دفتین بر آن ها کوبیده می شد. روش دوم، روش کنترل ابعاد است که با تنظیم دفعات ضربات دفتین سعی بر بافت فرش مطابق با نقشه طراحی شده بود. در نمونه های جفتی و بی گره برای رسیدن به ابعاد مورد نظر نقشه، اجبارا تعداد ضربات دفتین به یک بار کاهش یافت، در حالی که در نمونه های متقارن و نامتقارن تعداد ضربات دفتین به پنج یا شش بار افزایش یافت.
نتایج نشان می دهند که گره های متقارن و نامتقارن باعث افزایش طول قالی و گره های جفتی و بی گره موجب کاهش طول قالی می شوند و برای رسیدن به ابعاد مورد نظر، یا باید تعداد دفعات کوبیدن ضربات دفتین را تغییر داد و یا از مواد اولیه با نمره های متفاوت استفاده کرد. ضخامت کف فرش در نمونه ها نیز متاثر از نوع گره هستند؛ یعنی اگر تعداد ضربات دفتین زیادی بر گره های متقارن و نامتقارن وارد شود باعث افزایش ضخامت کف قالی می شوند و در حالتی که ضربات دفتین کنترل شوند، ضخامت مشابهی با گره های جفتی و بی گره برای کف قالی ایجاد خواهند کرد.
Symmetric and asymmetric knots، as two original knots، possess different physical and mechanical properties that influence the function of a carpet. Jufti and U knots give different properties to the carpet compared to the original ones. If they were used to produce specific properties، they would enhance the carpet's quality. However، nowadays their applications are considered as methods that diminishes the quality of carpets. As these properties have significant influence on the carpets، some attention is paid to them in different papers and textbooks. Carpet samples are woven with each knot type and identical materials by a weaver. Then the effect of various kinds of knots measured on the carpet length، carpet thickness and pile height. Samples are woven in two different methods. The first one is a method in which the number of beating the comb is controlled; i.e.، after each row of knots only and exactly two comb beats are applied to the row of knots. In the second method، the dimensions of samples were controlled and it is tried to weave the carpet with the dimensions designed; i.e.، the number of times the comb is beating down the row of knots varies according to the weaving progress. In jufti and U knot samples، the number of beating times inevitably reduced to one، while in symmetric and asymmetric samples it increased to five to six times to obtain the designed dimensions. Results show that symmetric and asymmetric knots lead to an increase in the carpet length، whereas the other two knot types end in a decrease in the carpet length. To reach the designed length it is necessary to change the number of beating or to use different materials with suitable yarn counts. The thickness of the foundation of carpet is also influenced by the knot type; i.e.، if the number of comb beating increases the foundation thickness increases as well، but if the number of comb beating remains constant there will be identical foundation thickness in carpets woven with different types of knots.