چکیده:
در این پژوهش، نوع جدیدی از لولههای حرارتی با عنوان شبکۀ لولههای حرارتی معرفی شده است. شبکۀ لولههای حرارتی طراحی، ساخته و سپس مورد ارزیابی عملکردی واقع شده است. این شبکه شامل 4 لولۀ حرارتی عمودی است که از پایین به کلکتور تبخیرکننده و در بالا به کلکتور چگالنده متصل است. بهمنظور بررسی تأثیر نانوسیال بر میزان راندمان حرارتی و مقاومت حرارتی شبکۀ لولههای حرارتی، با استفاده از روش دومرحلهای، نانوسیال اکسید مس تهیه شد. شبکۀ لولههای حرارتی با پرشوندگی 50% با سیال کاری آب و نانوسیال اکسید مس تحت آزمایش بهازای گرماهای ورودی مختلف قرار گرفته است. مشاهده شد که مقاومت کلی شبکۀ لولههای حرارتی با استفاده از نانوسیال با غلظتهای حجمی 1%، 3% و 5% بهترتیب به مقادیر 95/0، 84/0 و 75/0 نسبت به سیال کاری آب کاهش مییابد. بهعلاوه، برای غلظت 5% حجمی راندمان شبکۀ لولههای حرارتی تا میزان 80% افزایش یافت.
In this study, a new configuration of heat pipes as Heat Pipe Network is introduced. Here, the heat pipe network is designed, constructed, and put under the performance assessment. This heat pipe network consists of 4 vertical heat pipes connected to evaporator collector from bottom and condenser collector from top. In order to investigate the effect of nano-fluids on the thermal efficiency and thermal resistance of heat pipes network, copper oxide nano-fluids were prepared using a two-step method. Heat pipe network with 50% filling ratio water and copper oxide nano-fluid as working fluid was tested under different heat loads. It is found that the total resistance of heat pipe network using copper oxide nano-fluid with volumetric concentrations of 1%, 3%, and 5% --mixed with water as working fluid-- is reduced to 0.95, 0.84, and 0.75, respectively in comparison with dionized water. Moreover, for 5% volumetric concentration of nano-fluid, thermal efficiency exceed to 80%.