چکیده:
در این پژوهش، بررسی توانایی حذف رنگینه کاتیونی متیلن بلو با استفاده از پلیمرهای الکترواکتیو بر پایه پلی پیرول (PPy)، و پلی (3- متیل تیوفن) (P3MTh) در سیستم ناپیوسته مورد مطالعه قرار گرفت. از خاک اره (SD) تهیه شده از چوب نراد پس از مش بندی به عنوان نگه دارنده جهت پوشش پلیمرها و از سورفاکتانت آنیونی سدیم دودسیل سولفات (SDS) برای اصلاح سطح خاک اره پوشش داده شده استفاده شد. اثر برخی پارامترهای مهم مانند pH، غلظت اولیه رنگینه و زمان تماس بررسی شدند. برای ارزیابی داده های بهدست آمده، از منحنی های ایزوترم جذب (لانگمویر و فروندلیچ) استفاده شد. راندمان جذب برای متیلن بلو در pHهای بازی به حداکثر رسید. ظرفیت جذب با افزایش غلظت اولیه و زمان تماس افزایش یافت. در تمام موارد فرایند جذب از ایزوترم لانگمویر تبعیت ببشتری میکند و نشاندهنده فرآیند همگن و تک لایه می باشد. همچنین ظرفیت جذب بدست آمده در پلیمرهای SD/PPy، SD/PPy/SDS و SD/P3MTh به ترتیب برابر 52/59، 400 وmg/g 1000 شد. براساس بررسیها و نتایج حاصله در این پژوهش، مشاهده گردید که این مواد پلیمری میتوانند بطور موثری در رنگبری پسابهایی نظیر صنایع نساجی بکار گرفته شوند، که از نظر زیست محیطی از اهمیت ویژه ای برخوردار میباشد.
In this research, the ability for removal of methylene
blue cationic dye using Electro active polymers based on
polypyrrole (PPy) and poly (3-methylthiophene)
(P3MTh) in a batch system were studied. Sawdust (SD)
was made from wood, after patching, as a holder for
coating polymers and Sodium Dodecyl Sulfate Anionic
Surfactant (SDS) was used to modify the surface of the
sawdust. The effects of some important parameters such
as pH, initial concentration of dye and contact time were
investigated. To evaluate the obtained data, adsorption
isotherm curves (Langmuir and Freundlich) were used.
The adsorption efficiency for methylene blue was
maximized at alkaline pH. Adsorption capacity increased
with increasing initial concentration and contact time. In
all cases, the adsorption process complies with Langmuir
isotherm and represents the homogeneous and singlelayer
process. Also, the adsorption capacity obtained in
SD/PPy, SD /PPy / SDS and SD / P3MTh polymers were
59/52, 400 and 1000 mg/g, respectively. Based on the
studies and the results obtained in this study, it was
found that these polymer materials can effectively be
used in waste dyes, such as textile industry, which they
have the great environmental significance.