چکیده:
با توسعه کاربرد سیستم مکان یابی جهانی (GPS)، این روش بطور فزاینده ای کم هزینه، سبک تر و آسان تر گردید. صحت و درستی GPSبهبود یافت و ظاهرا کنترل مداوم تغییرات مرفولوژی بر روی سطح زمین، تغییرات جزئی و آرامی یافت. هدف از تحقیق این است که با استفاده از GPS مرفولوژی خندق ها را در یک آبگیر نزدیک به لوید از استان شانکسی اندازه گیری کند. در حیطه مطالعاتی، سه نوع خندق اصلی وجود دارد: خندق های کناری، خندق های کف دره، خندق های شیب تپه ای. این تحقیق عمدتا بر خندق های شیب تپه ای متمرکز است. خندقهای شیب تپه ای در محدوده تحقیق عمدتا ناپیوسته هستند و به سرعت توسعه می یابند. در حیطه تحقیق، دانسیته خندق، بسیار بزرگ میباشد. میزان پسروی خندق های شیب تپه سالیانه 0.16-2.0m میباشد. روابط بین محدوده زهکشی دارای شیب بالا (A) و شیب اصلی (S) خندق های تپه ای شیب دار S= 0.1839A است. مقادیر AS2 در برش های اصلی خندق های شیب تپه ای از طیف 41 تا 814 مترمربع است و بیشتر آنها از طیف 100-300مترمربع می ریزند. هر دوی این روابط بعنوان شاخص های موقعیت برش اصلی خندق در نظر گرفته می شوند.
By expanding the application of the Global Positioning System (GPS), this method became increasingly inexpensive, light and easy. The accuracy of the GPS was improved, and apparently, the constant control of the morphological changes on the surface of the earth altered slowly and modestly. The purpose of the study is to measure morphology of ditches in a pond near Loyd in the Shankxi province using GPS. there are three main types of ditches within the area of study: the side ditches, valley ditches, hill slope ditches. This research focuses mainly on ditches of the hill slopes. The ditches of the slope in the research area are largely discontinuous and develop rapidly. In the area of research, the density of the ditch is very large. The regress rate of the slopes of the hill is 0.16-2.0m per year. The relationship between the drainage area with high slope (A) and the main slope (S) of the ditches of hill slopes is S = 0.1839 A. The 2AS values in the main cuttings of the hill slope ditches are in a range of 41 to 814 square meters and most of them range from 100 to 300 square meters. Both of these relationships are considered as indicators of the position of the ditch’s main cutting.