چکیده:
از دیرباز، استفاده از ساختمانهای مصالح بنایی در ایران رواج داشته است و در بسیاری از شهرها و تقریباً در اکثر مناطق روستایی، قسمت اعظم ساختمانهای این مناطق را شامل میشوند. با توجه به آسیبپذیر بودن این نوع ساختمانها در برابر زلزله و نیز با عنایت به اینکه کشور ایران بر روی کمربند زمینلرزه قرار دارد، ساختمانهای بنایی بیشترین صدمات جانی و مالی ناشی از زلزله را به خود اختصاص دادهاند. ازاینرو، بحث مقاومسازی این ساختمانها، کاملاً ضروری میباشد. بر همین اساس، هدف اصلی این تحقیق شناسایی و اولویتبندی روشهای بهسازی ساختمانهای مصالح بنایی میباشد. جهت تجزیهوتحلیل دادهها، ابتدا روشهای مهم بهسازی این نوع ساختمانها با استفاده از مطالعات کتابخانهای شناسایی گردید و در فرآیند تحلیل از نظرات خبرگان که شامل 7 کارفرما، 5 شرکت پیمانکاری، 3 شرکت مشاور و 15 استاد دانشگاه بود، بهره گرفته شد. در این پژوهش، تعداد 10 روش که بیشترین درجه تکرارپذیری را در مقاومسازی ساختمانهای مصالح بنایی داشتهاند، انتخاب گردید. در ادامه جهت استفاده از روش DEMATEL فازی هر یک از روشها امتیازدهی گردید و درنهایت تأثیرگذاری و تأثیرپذیری هریک از عوامل مشخص گردید. نتایج تحقیق نشان میدهد که روش تقویت دیوارهای سازه بنایی بهوسیله شاتکریت (B3) بهعنوان تأثیرپذیرترین عامل و روش استفاده از آلیاژهای حافظهدار شکلی (B7) بهعنوان تأثیرگذارترین عامل در بهسازی ساختمانهای مصالح بنایی، مطرح میباشد.
For a long time, using building materials has been common in Iran and many cities, and nearly in most rural areas, the majority of the buildings in these areas are involved. Since this type of buildings is vulnerable to earthquakes and as Iran is located on the earthquake belt, masonry buildings have the most human and financial damage triggered by the earthquake. Consequently, the subject of retrofitting these buildings is undeniably crucial. Thus, this study aims to identify and prioritize methods of improving building materials. To analyze the data, primary, significant methods of improvement of this type of buildings were recognized via library studies and in the analysis process, the opinions of experts including 7 employers, 5 contractors, 3 consulting companies, and 15 university professors were used. In the current study, 10 methods that had the highest degree of reproducibility in the masonry buildings reinforcement were selected. Then, to use the fuzzy DEMATEL method, each of the methods was scored and lastly, the effectiveness of each factor was determined. The results reveal that the masonry structure wall strengthening method via shotcrete (B3) is the most effective factor and the method of using shape-memory alloy (B7) is the most effective factor in the masonry structures improvement.