چکیده:
به منظور ارزیابی پتانسیل شکستگی سطحی ناشی از زلزله، کاربردی جدید از نقشه برداری بسیار دقیق زمین شناسی با توتال استیشن الکترونیکی ارائه شده است. این روش، امکانی را فراهم می سازد تا بتوان گسل های ثانویه، که کوچکی 30 سانتیمتر جابه جایی عمودی را که در سطح نشان نمی دهند، تشخیص داد. این گونه گسل های بسیار کوچک دارای علائم و نشانه های توپولوژی نمی باشند و لذا احتمال زیاد می رود که مورد توجه قرار نگیرند در حالی که وجود گسل در محدوده تاسیسات و تحرکات را نشان می دهند.
این روش شامل نقشه برداری نقاط در عوارض زمین شناسی وتحلیل دقیق و مفصل رایانه ای و عملیات صحرایی نابهنجاری ها در ارتفاع نقاط نقشه برداری شده می باشد. نابهنجاری های عمومی در ارتفاعاتی مورد بررسی قرار می گیرند که بیشتر از گسل های نرمال و وارونه تشکیل یافته اند. با این حال، این روش را می توان برای گسلهای طولی لغزشی نیز به کار برد.
این روش شرایطی را فراهم می نماید که به راحتی داده های زمین شناسی را بتوان در GIS مجتمع نمود و به تحلیل جزئیات سه بعدی (3D) عوارض ساختار کوچک دست یافت؛ داده های صحرایی در نیمرخ های دیاگرامهای سه بعدی و نقشه هایی که به کمک نرم افزارهای کارتوگرافی ساخته می شوند، مورد تجزیه و تحلیل قرار گیرند.
توانایی این روش برای شناسایی گسلها با جابه جایی اندک امکان می دهد تا انواع سبک و شیوه دگردیسی، تقلیل در جابه جایی امتداد گسلهایی کوچک و واگرا که در دو انتهای گسلهای بزرگ و معمولی قرار دارند، خمشهای تک شیب و ساختارهای عرضی بین گسلها را مشخص کرد.
In order to evaluate the potential for earthquake surface fracture, a new application of highly accurate geological mapping with total electronic station is presented. This method makes it possible to detect secondary faults, which represent 30-cm-long vertical displacement that does not appear on the surface. These very small faults do not have signs and symptoms of topology, so it is likely that they will not be considered though they show the existence of faults in the range of installations and movements.
This method involves mapping of points in geological features and accurate and comprehensive analysis of computer details and field operations of abnormalities at the heights of mapped points. General abnormalities are considered at high altitudes that are mainly consisting of normal and inverted fault. However, this method can be used for longitudinal slip faults as well.
This method provides the conditions where geological data can easily be integrated into GIS and 3D analysis of details of small structure features can be achieved; field data can be analyzed in the profiles of three dimensional diagrams and in maps that are made using cartographic software.
The ability of this method to identify faults with slight displacement allows the types of metamorphism, reduction in displacement of the direction of small and divergent faults, located at the two extremities of large and ordinary faults, single-slope bends and transverse structures between faults can be determined.