چکیده:
آهن و محصولات خوردگی آن از جمله عوامل موثر در فرایند تخریب آثار چرمی، بهویژه نمونههای مدفون هستند. بر این اساس هدف از این مطالعه، ارزیابی تأثیرات محصولات خوردگی آهن در شدت تخریب چرم است. در این راستا یک نمونه چرمی حاصل از خاکبرداری محوطه کارخانه چرم خسروی تبریز (دانشگاه هنر اسلامی تبریز) مورد مطالعه قرار گرفت. بر اساس خصوصیات ظاهری، این چرم در شرایط تدفین در مجاورت آهن و محصولات خوردگی آن قرار داشته است. جهت ارزیابی ساختاری بخشهای مختلف چرم و شدت تخریب آنها، از آزمون نقطهای شناسایی آهن، اندازه گیری میزان خاکستر چرم، µ-XRF، طیف سنجی UV-Vis و FTIR و بررسی میکروسکوپی استفاده شد. همچنین طیفهای FTIR بر اساس تابع گوسی برازش شد و مورد بررسی قرار گرفت. نتایج حاصل نشان داد که این نمونه با استفاده از نمکهای کروم دباغی شده و احتمالاً از آهک جهت موزدایی آن استفاده شده است. بررسی چهار نقطه از این نمونه، حضور آهن با میزان متفاوت را در بخشهای مختلف چرم نشان داد، به عبارتی بخشی از چرم در تماس مستقیم با آهن قرار داشته است و به مرور محصولات خوردگی به ساختار چرم نفوذ کرده و موجب اختلاف در میزان آهن در بخشهای مختلف آن شدهاند. بررسی خصوصیات ساختاری این نواحی نشان داد که با افزایش آهن، تغییر در یکپارچگی ساختار مارپیچ سه جزئی کلاژن و هیدرولیز آن افزایش یافته و از طرفی تشدید اکسایش کلاژن را نیز بههمراه داشته است.
Iron and its corrosion products are among the effective factors in the degradation of leathers, especially in buried specimens. Therefore, the aim of this study is to evaluate the effects of iron corrosion products on leather deterioration. Accordingly, a buried leather sample obtained from historic “Khosravi” Leather Factory, Tabriz Islamic art university, was examined. Based on appearance, the leather was buried in the vicinity of the iron and its corrosion products. Structural evaluation of different parts of the leather and their deterioration was performed by spot test of iron, leather ash measurement, μ-XRF, UV-Vis and FTIR spectroscopy and microscopic examination. FTIR spectra were also fitted to the Gaussian function. The results showed that this sample was tanned with chromium salts and, probably, lime was used for dehairing. Examination of leather showed that the amount of iron varied in different parts of leather. In other words, a part of the leather has been in direct contact with iron and, over time, corrosion products have penetrated the leather structure. This has led to differences in the amount of iron in different parts of leather. Examination of the structural properties of these parts showed that as the amount of iron in the leather increased, the integrity of triple-helical structure of collagen collapsed and its hydrolysis increased. And it also has increased collagen oxidation.