چکیده:
با رشد سریع نیروگاههای بادی، این منابع در انواع و سطوح ولتاژی مختلف به شبکه متصل میشوند. دستهای از این منابع دارای ژنراتور القایی دوسوتغذیه هستند. گسترش تولیدات پراکنده مشکلاتی مانند افزایش سطح اتصال کوتاه و از دست رفتن هماهنگی تجهیزات حفاظتی ایجاد میکند. حین رخداد اتصال کوتاه، با تغییرات شدید سرعت، توان و زاویۀ روتور ژنراتور سنکرون و آسنکرون، ممکن است پایداری گذرای این منابع از بین برود. محدودکنندههای ابررسانا فوقگرمایی (HTSFCL) بر اساس وابستگی مقاومت- دما توانایی کاهش جریان خطا را دارند. در این مقاله، پس از بررسی توانایی HTSFCL در کاهش جریان خطا و افزایش میزان پایداری در نرمافزار PSCAD/EMTDC، تابع هدف جایابی بهینۀ HTSFCL با درنظرگرفتن همزمان شاخصهای امنیت و هماهنگی حفاظتی، پایداری ولتاژ و پایداری گذرا ژنراتور سنکرون و آسنکرون در شبکههای متصل به نیروگاه بادی برای اولین بار پیشنهاد میشود. مکان و اندازۀ بهینۀ HTSFCL در شبکۀ آزمون 30 شینه IEEE با استفاده از الگوریتم تکامل تفاضلی در نرمافزار MATLAB با درنظرگرفتن شاخصهای منفرد و چندهدفۀ تعیین و شاخصهای امنیت، هماهنگی رلههای جریان زیاد و پایداری ولتاژ و زاویۀ روتور در شش حالت مقایسه شدند. نتایج بهدستآمده کارایی روش پیشنهادی را نشان میدهند.
With the rapid growth of wind power plants, different types of these resources are connected to the network at different voltage levels. A number of these resources have DFIG. The development of distributed generation has made problems such as an increased level of short circuit and the loss of protective devices coordination. During the fault occurrence, transient stability may be lost due to drastic changes in speed, power, and rotor angel of synchronous and asynchronous generators. Based on the dependence of resistance and temperature, high-temperature superconducting fault current limiter could decrease the fault current. This paper, after studying the ability of HTSFCL to reduce the fault current and to increase the stability level in PSCAD/EMTDC software, for the first time proposes objective function of HTSFCL optimal location by simultaneously considering security and protection coordination indices, voltage, and transient stability of synchronous and asynchronous generators in the networks connected to DFIG. Optimal location and size of HTSFCL in IEEE 30-bus test network are determined using differential evolution (DE) algorithm in MATLAB while considering single- and multi-objective indices. Also, indices of security, coordination of overcurrent relays, voltage stability, and rotor angel stability are compared in six modes. The achieved results show the applicability of the proposed method.