چکیده:
فرایند تهویه اتاق برای بالا بردن شرایط آسایش حرارتی ساکنین و کاهش مصرف انرژی صورت میگیرد. هرچند که تاکنون بیشتر بر روی نرخ جریان و دمای بهینه هوای ورودی و نوع سیستم تهویه پرداخته شده است، در این مقاله به کمک نرمافزار انسیس فلوئنت، بیست حالت مختلف قرارگیری دریچه ورودی و خروجی هوا در اتاق شبیهسازی شده و مقادیر سرعت و دما در فضای داخل اتاق بهدست آمده است. سپس با در نظرگرفتن سه معیار مقایسه شامل کارایی تهویه، دمای متوسط مؤثر و گرادیان عمودی دما، این بیست نمونه مقایسه و حالتی که در آن دریچه ورودی در دیوار روبروی آدمک در وسط دیوار و دریچه خروجی در همان دیوار در پایین آن قرار دارد، بهعنوان بهترین موقعیت استقرار دریچه ورودی و خروجی مشخص شده است. در این نمونه دمای میانگین برابر ℃68/23، کارایی تهویه 36/2 و دمای مؤثر متوسط 01/1- بهدست آمده است. همچنین بررسی تغییر مساحت اتاق نمونه 3 برابر با مقادیر 12، 16 و 20 مترمربع نشان داد که با افزایش مساحت، کارایی تهویه به میزان %86/11 کاهش و با افزایش دبی هوا از 045/0 تا 134/0 مترمکعب بر ثانیه، دمای میانگین اتاق% 54/12 کاهش پیدا میکند.
Process of roomchr('39')s air-conditioning system is used to enhance thermal comfort and reduceing energy consumption. Although, the most of the researches have concentrated more on flow rate and optimum temperature of inlet air, present study software was used to obtain the best possible locations for inlet and outlet channels for 20 samples of room using Ansys Fluent. Three factors including ventilation efficiency, effective average temperature and vertical temperature gradient were considered to find the best location for inlet and outlet port locations. As a result, the twentieth model was approved, where inlet channel placed in the middle of opposite wall from manikin and the outlet channel located at the bottom of the same wall. Moreover, analysis of rooms with area of 12 𝑚2, 16 𝑚2 and 20 𝑚2 showed that by increasing the area, the efficiency decreased by 11.86% and by increasing the air flow from 0.045 to 0.134 m3/s, the average temperature Room decreases 12/54%.