چکیده:
افزایش جمعیت وگسترش شهرنشینی، کاهش فضاهای سبز، مصرف زیاد سوختهای فسیلی، انتشار گازهای گلخانه ای و استفاده از مصالح نا مناسب پدیدآورنده میکروکلیمای جزیره حرارتی بر فراز شهرها شده؛ که چندین درجه سانتیگراد هوای شهر را از پیرامون خود (روستاها) گرمتر نموده. لذا این مقاله بعد از شناخت عوامل موثر بر ایجاد جزایر حرارتی (همچون موقعیت شهر؛ اندازه شهر و جمعیت؛ تراکم محیط ساخته شده؛ هندسه شهری؛ ویژگی حرارتی سطوح شهری؛ سطوح ضد آب؛ گرمای انسان ساخت و آلودگی هوا ) و معرفی استراتژیهای کاهشی(همچون استراتژی های سبز شهری، سطوح سرد شهری، طراحی شهری، کاهش گرمای انسان ساز )، به بررسی پارامترهایی همچون میانگین دمای تابشی و دمای هوا در سه آلبدوی بالا0.8، آلبدوی متوسط(0.5) و آلبدوی پایین(0.3) می پردازد. در این راستا با انتخاب خیابان پونک در شهر قزوین که دارای تنوع در مصالح می باشد، با بررسی از طریق شبیه سازی با نرم افزار Envi met به این نتیجه رسیدیم که تغییرات در میزان توان تابشی و دمایی محیط میتواند تاثیر بسزایی در میزان میانگین دمای تابشی محیط و به تبع آن بر آسایش حرارتی فضای باز محیط بگذارد، نتایج حاکی از آن است که با وجود مناسب بودن مصالح سرد با آلبدوی بالا برای کف خیایانها و بامها اما مصالح دارای آلبدوی بالا در نما بخاطر انعکاس زیادی که به محیط دارند آسایش حرارتی را پایینتر می آورند و محیط را گرمتر می کند و در شهرهایی که دارای جزیره حرارتی هستند مصالح روشن باعث گرم شدن محیط می شوند اما در شهرهایی که هنوز مشکل تشکیل جزایر حرارتی وجود ندارد استفاده از مصالح روشن با آلبدوی بالا سبب کاهش مصرف انرژی در داخل ساختمان می گردد و سبب می گردد سرمایش ساختمانها در تابستان کمتر شده و بالتبع مصرف انرژی کاهش یابد.
Introduction Urban population, urbanization growth, Reduce green spaces, High fossil fuel consumption, greenhouse gas emissions, and Use of inappropriate materials They have created a heat island over the cities That cause the city's air several degrees Celsius warmer surroundings. Nowadays, science has proven that there has been a lot of climate change throughout the life of the planet Earth, and many indicators show that human intervention in nature is accelerating natural processes. Humans have been known to be involved in the occurrence of many natural disasters including global warming, sea-level rise, forest destruction, ozone depletion, acid rain, and biodiversity decline. Population growth, urbanization, green space decrease, fossil fuels overuse, greenhouse gas emission, and the use of inappropriate building materials have caused the emergence of thermal island microclimates over cities which make cities warmer than their vicinities (villages) by several centigrade degrees. Methodology This phenomenon is influenced by several factors such as city location, city size and population, urban density, urban geometry, thermal properties of urban surfaces, waterproof surfaces, human-caused heat and air pollution. Some of these factors require long-term urban planning, but others such as using appropriate building materials can be considered as an early yielding decrease strategy to mitigate the destructive effects of heat islands. Therefore, this paper, after identifying the factors affecting the creation of heat islands and introducing the decrease strategies, tries to examine parameters such as mean radiant temperature and air temperature in three high albedo (0.8), medium albedo (0.5) and low albedo (0.3). In this regard, by choosing Poonak street in Qazvin, which has a variety of building materials, and by studying through Envi_met simulation software. Result and Discussion Materials used in urban environments absorb and accumulate solar and infrared rays and transmit them to the atmosphere, so materials play an important role in reducing the reception, storage of heat, and its transfer to the urban environment. The findings show that, it was concluded that changes in the amount of ambient radiant and temperature power can have a significant effect on the mean radiant temperature and consequently on outdoor thermal comfort. The results show that although cool materials with high albedo are suitable for roadbeds and roofs, but high albedo materials in the facade, due to their high reflectivity, bring lower thermal comfort and warmer environments in cities. In cities with heat islands, cool materials can warm the environment, but in cities with no heat islands, use of high albedo materials reduces indoor energy consumption in summer. Conclusion The results indicate that in order to reduce the mean radiant temperature (the most important factor of thermal comfort), direct and indirect radiant flux values must be controlled. Therefore, with the decrease in the amount of albedo in the facade materials, the radiant flux of the environment decreases leading to a simultaneous decrease in air temperature and the mean radiant temperature (Tmrt). Materials with albedo have the highest reflectivity, as a result of which the materials remain cold and heat is not transferred to the interior; however high albedo is not suitable for facade materials in cities that have a heat island, because it causes an increase in ambient temperature. The solution is to use materials with low albedo; thus, the ambient temperature does not increase and because the heat from the materials to the interior is not transferred. Use suitable thermal insulation in the wall so that the heat absorbed by the materials is not transferred to the interior.
خلاصه ماشینی:
لذا اين مقاله بعد از شناخت عوامل مؤثر بر ايجاد جزاير حرارتي (همچون موقعيت شهر؛ اندازه شهر و جمعيت ؛ تراکم محيط ساخته شده ؛ هندسۀ شهري؛ ويژگي حرارتي سطوح شهري؛ سطوح ضد آب ؛ گرماي انسان ساخت و آلودگي هوا ) و معرفي استراتژيهاي کاهشي(همچون استراتژي هاي سبز شهري، سطوح سرد شهري، طراحي شهري، کاهش گرماي انسان ساز )، به بررسي پارامترهايي همچون ميانگين دماي تابشي و دماي هوا در سه آلبدوي بالا(٠,٨)، آلبدوي متوسط (٠,٥) و آلبدوي پايين (٠,٣) ميپردازد.
در اين راستا، با انتخاب خيابان پونک در شهر قزوين که داراي تنوع در مصالح مي باشد، با بررسي از طريق شبيه سازي با نرم افزار Envi met به اين نتيجه رسيديم که تغييرات در ميزان توان تابشي و دمايي محيط ميتواند تأثير بسزايي در ميزان ميانگين دماي تابشي محيط و به تبع آن بر آسايش حرارتي فضاي باز محيط بگذارد، نتايج حاکي از آن است که با وجود مناسب بودن مصالح سرد با آلبدوي بالا براي کف خيايان ها و بام ها، اما مصالح داراي آلبدوي بالا در نما بخاطر انعکاس زيادي که به محيط دارند، آسايش حرارتي را پايينتر ميآورند و محيط را گرمتر ميکند و در شهرهايي که داراي جزيرة حرارتي هستند مصالح روشن باعث گرم شدن محيط مي شوند اما در شهرهايي که هنوز مشکل تشکيل جزاير حرارتي وجود ندارد، استفاده از مصالح روشن با آلبدوي بالا سبب کاهش مصرف انرژي در داخل ساختمان مي گردد و سبب ميگردد، سرمايش ساختمانها در تابستان کمتر شده و بالتبع مصرف انرژي کاهش يابد.