چکیده:
در پژوهش حاضر حساسیت سنجی عناصر هواشناسی (نظیر میانگین دما، رطوبت نسبی و سرعت باد) به پارامترسازیهای فیزیکی مختلف در مدل پیش بینی عددی وضع هوا (WRF) جهت شبیه سازی اقلیم شهر و تعدیل جزیره گرمایی شهری منطقه مورد مطالعه، مورد ارزیابی قرار گرفت. جهت مطالعه مسائل زیست محیطی شهری از مدل تاج پوش شهری (UCM) به صورت جفتشده با مدل WRF استفاده شد. آزمایشهای متعددی به منظور دستیابی به پیکربندی بهینه برای انجام شبیه سازی در بازه زمانی 18-21 آگوست 2016 با شرایط جوی پایدار در فصل تابستان اجرا شد. انتخاب مناسبترین پیکربندی با کمترین خطا، به عنوان بستری مناسب برای شبیه سازیهای اقلیم شهری جهت مطالعه راهکارهای تعدیل جزیره گرمایی شهری (UHI) مطرح میشود. افزایش بازتاب سطوح جهت کاهش UHI در دامنه اعمال گردید. جهت ارزیابی عملکرد پیشبینی مدل و مقادیر مشاهداتی متناظر با آن از دو شاخص ریشه میانگین مربعات خطا (RMSE) و میانگین خطای اریب (MBE) استفاده شد. نتایج نشان داد در استان تهران، بطورکلی تمامی پیکربندیها دمای هوا و سرعت باد را کمتر از مقدار واقعی و رطوبت نسبی را بیشتر از مقدار واقعی برآورد مینمایند. همچنین در استان البرز تمامی پیکربندیها دمای هوا و سرعت باد را بیشتر از مقدار واقعی و رطوبت نسبی را کمتر از مقدار واقعی برآورد مینمایند. با افزایش انعکاس سطوح شهری، میانگین دمای استانهای تهران و البرز به ترتیب به میزان 6/0 و 2/0 درجه سانتی گراد کاهش مییابد. سرعت باد مخصوصا در نواحی شهری، مقداری افزایش مییابد. همچنین شاهد افزایش میانگین رطوبت نسبی (خصوصا در نواحی شهری) در مناطق مورد مطالعه خواهیم بود.
In this research, the sensitivity of the meteorological elements (such as mean temperature, relative humidity and wind speed) to different physical parameterizations in the numerical forecast model (WRF) was evaluated to simulate the climate of the city and adjust the Urban Heat Island of the study area.To study urban environmental issues, the Urban Canopy Model (UCM) was coupled to the WRF model. Several experiments were performed to achieve optimal configuration for simulation in the period from 18-21 August 2016 in the stable atmospheric conditions in summer. Selection of the most appropriate configuration with the least error is proposed as an appropriate setting for urban climate simulations and the study of Urban Heat Island (UHI). Increasing surface reflections to reduce UHI in the range was applied. Two indices of Root Mean Square Error (RMSE), and Mean Bias Error (MBE) were used to evaluate the predictive performance of the model and its corresponding observational values. The results showed that in the province of Tehran, in general, all configurations estimate the air temperature and wind speed less than real and relative humidity more than the actual value. In Alborz province, all configurations estimate the air temperature and wind speed more than real and relative humidity less than real value. By increasing the reflection of urban levels, the mean temperature of Tehran and Alborz provinces decreases 0.6 and 0.2 ° C, respectively. Wind speed, especially in urban areas, increases somewhat. We also see an increase in relative humidity (especially in urban areas) in the studied areas.