Abstract:
تغییرات در محیط زیست شهری، عمدتا در ساخت، تخریب یا بازسازی ساختمانها، تحتتاثیر عواملی نظیر بلایای طبیعی و یا گسترش شهری بهوجود میآیند. شناسایی این تغییرات میتواند نقش بسزایی در بروزرسانی مدلهای سهبعدی شهری و تصمیمگیری صحیح مدیران در مدیریت سوانح و بحرانها داشته باشد. از میان تمامی روشهای آشکارسازی تغییرات که به دو دستۀ دوبعدی و سهبعدی تقسیم میشوند، روشهای آشکارسازی سهبعدی تغییرات ساختمانها، بهدلیل مرتفع بودن عارضۀ ساختمان، مناسبتر هستند و نتایج حاصل از آنها به واقعیت نزدیکتر است. هدف از این مطالعه ارائۀ روشی موثر برای آشکارسازی سهبعدی تغییر در ساختمانهای مناطق شهری براساس مدلهای رقومی ارتفاعی است. روش ارائهشده در این مقاله شامل سهمرحله اصلی است: 1) تولید مدل رقومی سطح، مدل رقومی زمین و مدل رقومی سطح نرمال در دو بازۀ زمانی، 2) انجام تجزیهوتحلیل شیء مبنا شامل قطعهبندی و طبقهبندی ساختاری مدلهای رقومی ارتفاعی بهمنظور تولید نقشههای طبقهبندی چندزمانه، 3) تهیۀ نقشههای تغییر و تجزیهوتحلیل درصد تغییر بین کلاسهای مختلف عوارض در مناطق شهری. توانایی الگوریتم پیشنهادی در یک منطقه شهری درحالتوسعه سریع در تهران، در فاصلۀ زمانی 9 ساله ارزیابی شد. نتایج بهدستآمده حاکی از کاهش سطح زمین و خاک لخت در حدود 37/ 1% است و همچنین، ساختمانهای کمارتفاع (کمتر از 3 طبقه) نیز در حدود 6/ 7% کاهش یافتهاند. علاوهبر این، کلاس ساختمانهای مرتفع (بیش از سه طبقه) در حدود 4/ 16% افزایش یافته که علاوهبر نوسازی ساختمانهای کمارتفاع، سازههای جدید را نیز شامل میشود.
Introduction: Multi temporal changes in built up areas are mainly caused by natural disasters (such as floods and earthquakes) or urban sprawl. Detecting these changes which consist of construction, destruction and renovation of buildings can play an important role in updating three dimensional city models. Multi-temporal remote sensing data are one the powerful tools for detecting urban changes due to the increasing growth and then, for updating the three dimensional city models. Urban changes detection methods using various types of remotely sensed data have been proposed by many researchers to meet a wide range of applications (Singh, 1989). Considering the procedure of algorithms and the utilized multi-temporal remote sensing data, change detection algorithms can be divided into two dimensional and three dimensional categories (Qin et al. , 2016). Many of the proposed urban change detection methodologies have utilized only the multi-spectral remote sensing data without considering digital elevation models, which caused some problems in buildings identification (Bouziani et al. , 2010; Brunner et al. , 2010; Huang et al. , 2014; Vakalopoulou et al. , 2015). Two dimensional changes detection methods have some serious problems such as high computational cost and inaccessible volumetric information due to the absence of altitude data. Moreover, as digital elevation models can be easily produced recently, the three dimensional changes detection methods are more concerned (Martha et al. , 2010; Tian et al. , 2014; Waser et al. , 2008; Daniel & Doran, 2013; Gruen, 2013). Three dimensional change detection methods are suitable for identifying the changes of high altitude objects such as buildings and their results are more close to reality. Three dimensional change detection methods can be considered in one of the spectral-geometric analysis methods or geometric comparison (Qin et al. , 2016).
Methodology: The objective of this study is to provide an effective method for three dimensional changes detection of buildings in urban areas based on Digital Elevation Models (DEMs). The proposed three dimensional building change detection algorithm in this research is considered for estimating the construction of new buildings in flat areas and renovation of low-rise buildings (up to three floors) in order to make high-rise ones (more than three floors). The proposed method in this paper consists of three main steps; 1) generating Digital Surface Model (DSM) , Digital Terrain Model (DTM) and normalized DSM for two epochs, 2) performing object based image analysis consists of segmentation and structural classification of DEMs in order to generate multi temporal classification maps, 3) producing the change maps and analyzing the change percentages between various object classes.
Resullts & Discussion: The ability of the proposed algorithm is evaluated in a rapid developing urban area in Tehran, Iran in a 9-years interval. The obtained results represent that the ground and bare soil decreased for about -1. 37% and low-rise buildings also decreased for about -9. 7%. Moreover, the class of high-rise buildings increased for about +16. 4% which conforms making new constructions in addition to renovation of low-rise buildings. As the objective of this research was to investigate the three aspects of changes in built up areas containing new constructions, destruction and renovation of buildings, some interesting results are obtained. The main changes occurred in this region are in the new construction category with 4. 8% growth which is occurred to about 132680 square meters of the study area. Moreover, the renovation of low-rise buildings to high-rise ones is 3. 05% of land use equivalent to 83889. 5 square meters. The obtained results showed 3. 89% destructions in the buildings which is occurred to 106896. 25 square meters of this study area. Most of the destructions are in the low-rise building class which confirms decreasing the worn texture of the city and urban passages sweating.
Conclusion: According to the results, the construction of new buildings is faster than the vertical growth of the city and its destruction in this 9-years period. As it is clear from the results of this study, change detection in urban environment can help urban planners to manage land resources and prevent the growth of irregular constructions. As high-rise buildings prevent wind, disrupt the urban ecosystem and increase air pollution, it is important to control and manage the vertical growth of the cities.
Kay words: Three dimensional change detection, Building, Object Based Image Analysis, Segmentation, Normalized DSM
Machine summary:
روش ارائه شده در این مقاله شامل سه مرحله اصلی است : ١) تولید مدل رقومی سطح ، مدل رقومی زمین و مدل رقومی سطح نرمال در دو بازۀ زمانی، ٢) انجام تجزیه وتحلیل شیء مبنا شامل قطعه بندی و طبقه بندی ساختاری مدل های رقومی ارتفاعی به منظور تولید نقشه های طبقه بندی چندزمانه ، ٣) تهیۀ نقشه های تغییر و تجزیه وتحلیل درصد تغییر بین کلاس های مختلف عوارض در مناطق شهری.
, 2014) ازآنجاییکه اطلاعات ارتفاعی در تشخیص ساختمان های شهری نقش بسیار قابل توجهی دارد، در این مقاله یک روش آشکارسازی سه ُبعدی تغییرات مبتنی بر تحلیل شیء مبنای مدل های رقومی ارتفاعی چندزمانه پیشنهاد داده شده است .
(به تصویر صفحه مراجعه شود) شکل ١: ساختار روش پیشنهادی آشکارسازی سه ُبعدی تغییرات ساختمان در منطقۀ شهری همان طور که در شکل ١ نشان داده شده است ، الگوریتم آشکارسازی سه ُبعدی تغییرات در این مقاله دارای سه مرحله اصلی است : ١) تولید مدل رقومی ارتفاعی زمین ١ (DTM)، مدل رقومی ارتفاعی سطح ٢ (DSM) و مدل رقومی سطح نرمال ٣ (nDSM) برای دو دورۀ زمانی مختلف .
از آنجاییکه هدف اصلی این تحقیق آشکارسازی سه ُبعدی تغییرات ساختمان ها در مناطق شهری مبتنی بر مدل های رقومی ارتفاعی است ، زمین (خاک لخت و جاده )، ساختمان های کم ارتفاع (تا سه طبقه ) و ساختمان های مرتفع (بیش از سه طبقه ) به عنوان کلاس های عارضه ازپیش تعریف شده ، انتخاب شده اند.
“Building change detection from multi temporal high-resolution remotely sensed images based on a morphological building index”.